This product is a rapid chargerwith a high performance microprocessor and specialized operating software.
Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating and safety. Or please do use this product in company with a specialist!

• Operating voltage range:DC11.0~18.0 Volt/AC to DC adaptor (DC11.0~18.0V/5A)
• Circuit power: Max. charge power 50W/Max. discharge power5W
• Charge current range:0.1~5.0A
• Discharge current range:0.1~1.0A
• Current drain for balancing Li-po:300mAh/cell
• NiCd/NiMH battery cell count:1~15cell
• li-ion/Polymer cell count:1~6 series
• Pb battery voltage:2V~20V
• Weight:277g(Net Weight)
• Dimensions:133*87*33mm

• Maximum safety
• Delta-peak sensitivity
  The automatic charge termination program based on the principle of the
• Delta-peak voltage detection
  When the battery's voltage exceeds the threshold, the process will be terminated automatically.
• Automatic charging current limit
  You can set up the upper limit of the charging current when charging your NiCd or NiMH battery;
  it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
• Capacity limit
  The charging capacity is always calculated as the charging current multiplied by time. If the
  charging capacity exceeds the limit, the process will be terminated automatically when you set
  the maximum value.
• Temperature threshold*
  The battery's internal chemical reaction will cause the temperature of the battery to rise. If the
  temperature limit is reached, the process will be terminated.
  * This function is available by connecting optional temperature probe, which is not included in
  our package.
• Processing time limit
  You can also limit the maximum process time to avoid any possible defect.
  Input power monitoring
  To protect the car battery used as DC input power from being damaged, its voltage keeps being
  monitored. If it drops below the lower limit, the process will be ended automatically.
• Data store/load
  The maximum five batteries' data can be stored for users convenience. You can keep the data
  pertaining to program setting of the battery of continuous charging or discharging. Users can
  call out these data at any time without any special program setting.